Housekeeping note: how to avoid mistakes when ironing linen
Meet on clothes, and escorted to her too. Alas, but unkempt, rumpled clothes able to slightly spoil the impression of even a brilliant professional. So do not forget to put things in order more in the evening. And that certainly look like a brand-new, ironed shirts, blouses and suits properly. And do not let annoying bugs that can easily spoil the fabric, and your mood.
One would think that a complex in ironing? But in this case simple enough, there are many nuances and characteristics. The violation of which can lead to unpleasant consequences: from the hole on your favorite shirt to the burnt iron. Check yourself and you pet right?
Error №1: iron "dry"
Dry the fabric and heat - is not the best of friends. Actually, this "friendship" could easily end holes, is only slightly overexpose the iron in one place. And in a good case, all just folds remain in place. But under the influence of moisture fibers soften and become more flexible and pliable. And at the same time and is much easier to flatten. So do not forget the good things be steamed during ironing. The benefit of this option is, in almost all modern irons.
№2 Error: iron "delicate" last
Always leave a blouse with lace or thin summer dress "for dessert" ironing? And here is the reason. The fact is that the iron cools down much more slowly than the hot. And at the beginning of an exciting process, its surface temperature would be probably lower than in the final. And therefore better to start with the more delicate fabrics, such as silk, polyester, and a dense finish Cotonou or linens. Well, about a suitable time, of course, do not forget.
Error №3: wrong mode
Most of the stuff of mass-market stores are made of "mixed" tissue, often synthetic origin. You do not know how to iron clothes on the label with which the composition of said mysterious "fabric blend"? Choose the delicate cycle - can not go wrong.
Error №4: do not prepare linen ironing things to
In order to effectively and without loss pat things made of natural cotton, for 10 minutes necessarily abundantly sprinkle them with cold water and leave on the rack or dryer.
Error №5: properly iron a shirt or pants
The most common mistake - start "the wrong". Experts advise the first stroke most hard areas - cuffs, collar and belt. In this richly hydrating them. And only then iron the main surface.
Error №6: not clean iron
Yes, iron also needs to be cleaned. Even the smallest particles of fabrics and threads can damage the surface and, consequently, all the things during ironing. So buying special tools for the iron will not be superfluous. Or you can always make a paste and water and soda. The main thing is to use a homemade mix only when the iron is cold.
№7 Error: Store irons with water
Always pour the remaining water after ironing. Leaving it for a long time inside, you risk damaging the iron.
Error №8: use "harsh" tap water
If you know that the water in your area is not is soft, it is best to use distilled ironing. The content of some minerals can provoke a precipitate. Which, in turn, can damage equipment.
Error №9: not to change the ironing board for years
Everything has a shelf life. And if on your ironing board appeared dents or burnt through the fabric - this is a clear signal that it is time to change something. Especially, even a simple accessory, and the perfected over the years.