As previously printed photos

• As previously printed photos

Nostalgic post for photographers with experience. So print photos and it was only recently - reagents (developer and fixer), enlarger, glyantsevatel ...

So. The film finished shooting, taken when dry. We obtain a photographic enlarger.

For the first time, perhaps years, for 10 open lid of the suitcase.

Hmm. Foam during this time decayed to a state sticky lewdness :(

Okay, scrapes it and start to get components.

So, like everything got. Remember like now as everything is going :)

What a handsome :)

The lamp lay the same 10 years. Inside, it seems, pieces of glass, is clearly heard as they hang out there. The very light matte, spiral state is not visible. Okay, we cleave to good luck. Turn.

Ofiget. Lights. The truth is somehow dimly. Okay. For reliability puts a photograph.

Do not nifiga light does not shine. Join enlarger to civilization.

Looks cool. Let's see how it will work.

It is sad. Get even dimmer. It seems that misses the focal length of the lens. Experiment for the sake of trying to shine a flashlight with a twisted deflector.

The result exceeds all expectations, but keep as a flashlight - not an option.

It's time to fill the film. Select the desired crop or resize (yes, the crop was not done with Photoshop and select the desired crop box, which limited the area of ​​exposure). At the same time put a frosted piece of glass in a special pocket on the film.

Well, like nothing more interesting. Since the seal decomposed, try to replace it with glamorous pink napkins.

Climbed clean enlarger and came across this.

God, what is he old. Anyway. Scrub away most vicious dirt dismantle it.

Energy saving technology - our all :) lamp stood as a native, even get a nice light than an incandescent bulb.

Lantern, by the way, tri-mode. Time.

Two.

And three.

Well, if the flashlight is, why not go all the Photo print process from scratch? Photographic paper, almost new :)

The workplace young photographer. In the bathroom, of course.

trough with the developer, fixer clamp.

On the photo paper and film can only work under the light of a red lamp.

Refill film, we put a piece of glass in front of red Lenses enlarger, include it, select the position of the pre-charge paper.

The most crucial moment. Remove the red piece of glass, to count to ten. One, two ...

Ten. Close the lens, gently take a piece of paper and the developer.

The image on the paper appeared, we wait until it becomes sufficiently clear. The main thing is not to overdo, and then messed up and will be too dark. All further into the lock.

Wait till some time, washed in a basin with clean water and hang the wrap around.

While the liquid flows from the pictures, we obtain glyantsevatel. This heater with mirrored surfaces, which makes our glossy pictures.

screwed legs, arms, remove the mirror.

We put a photo picture to the mirror. Packer roller, so as not to be left to the air bubbles.

put the mirror in place, close the cloth and is fastened on top of the special lock. We turn on the device and go to drink coffee.

After waiting a sufficient photo dry. Glyantsevatel turn off, remove the cloth and mirror. Photo of herself jumping into our hands. Smell pictures svezheprosushennoy remembered for a lifetime :)